Iniciar sesión:
Votos - 3, Puntuación media: 4 ( )

Manual de usuario Panasonic, modelo PVM2069W

Fabricar: Panasonic
Tamaño del archivo: 2.2 mb
Nombre del archivo: PVM2059.PDF
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página

Resumen del manual

2:00 a.m. NORMAL TIME DAYLIGHT SAVING TIME 3:00 a.m. 4:00 a.m. Autumn (Last Sunday in October) DST:ON -* Turns clock back one hour. DAYLIGHT SAVING TIME 1:00 a.m. 2:00 a.m. NORMAL TIME 1:00 a.m. 2:00 a.m. If your area does not observe Daylight Saving Time, select DST: OFF. Keep these time changes in mind when programming the Combination VCR for timer recordings. 40 Playing older or damaged tapes may eventually cause video heads to become clogged. Head Clog Sensor During playback this screen appears if clogging is detected. To remove screen, press PLAY on the remote or Combination VCR. • Use "dry” type head cleaning cassette* only. (Part No. NV-TCL30PT is recommended.) • Follow cleaning tape carefully. Excessive use of tape can shorten head life. V IDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAO CLEANING CASSETTE OH REFER TO MANUAL END:PLAY KEY If head clog symptoms persist, contact your nearest Factory Service Center or authorized Service Center. (See page 42.) Specifications Display Picture Tube: VCR 20 inch measured diagonal 90° deflection Picture Tube (PV-M2059/PV-M2069W) 25 inch measured diagonal 110° deflection Picture Tube (PV-M2559) Video Recording System:2 rotary heads (PV-M2059/PV-M2069W) 4 rotary heads (PV-M2559) helical scanning system 1 track Audio Track: Tuner: Broadcast Channels: CABLE Channels: FM Radio Band range: VHF2-13, UHF 14-69 Midband A through I (14-22) Superband J through W (23-36) Hyperband AA-EEE (37-64) Lowband A-5-A-1 (95-99) Special CABLE channel 5A (01) Ultraband 65-94, 100-125 87.5-108.1 MHz General Power Source: 120V AC, 60 Hz Power Consumption: Power On Approx. 110 watts (PV-2059/PV-M2069W) Approx. 149 watts (PV-M2559) PgwenQff Approx. 4.5 watts EIA Standard NTSC color 1 piece 41°F-104°F (5°C~40°C) 10%~75% 50.6 lbs. (23 Kg) (PV-M2059/PV-M2069W) 72.6 lbs. (33 Kg) (PV-M2559) 20-5/16” (W) X 19-7/8” (H) X 18-11/16” (D) 515 (W)X 505 (H)X 474 (D) mm (PV-M2059/PV-M2069W) 24-15/16” (W)X 23-1/4” (H)X 18-1/4” (D) 634 (W) X 590 (H) X 464 (D) mm (PV-M2559) Note: Designs and specifications are subject to change without notice. Television System: Speaker: Operating Temperature: Operating Humidity: Weight: Dimensions: For assistance, call 1 -800-211-PANA(7262) Before Requesting Service Check the following points once again if you are having trouble with your Combination VCR. Power Correction No power... • Completely insert Power Plug into an AC outlet. • Set POWER button to ON. Monitor Correction No picture or sound... • Make sure your antenna system (TV or CABLE), is correctly set. (P. 5) • Completely insert Power Plug into an AC outlet. • Check that POWER button is set to on. Poor picture with normal sound... • Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in the SET UP TV menu. (P.9) Poor sound with normal picture... • Adjust VOLUME control. (P.8) Poor TV reception... • Adjust SHARPNESS and PICTURE controls in the SET UP TV menu. (P.9) No color or poor color... • Adjust TINT and COLOR controls in the SET UP TV menu. (P.9) Ghost (multiple) images... » Install a directional antenna. TV programs cannot be watched... • Make sure that the channel being received is in the Combination VCR's memory. (P. 38) Channel cannot be selected... • The design of this unit is such that only the channel being recorded can be viewed. VCR Correction TV program cannot be recorded... • Make sure your antenna system (TV or CABLE), is correctly set. (P. 5) • Make sure cassette record tab is intact. (P. 4) Timer recording cannot be performed... • Check clock is set to current time and date. • Make sure DSS/CABLE box (if used) is left on and tuned to channel to be recorded. ■ Set recording Start/Stop time correctly. (P. 12-13) • Timer recording may not be performed or continued if a power interruption of more than 1 minute occurs before or during a Timer Recording, after power is restored. No playback picture, or the playback picture is noisy or contains streaks... • Adjust TRACKING control in either direction. (P.10) • Try Head Cleaning. (P.40) VCR cannot be controlled... • Make sure VCR LOCK is set to off. (P. 32) • Make sure unit is not in a Timer Record operation. Remote Control Correction Combination VCR cannot be controlled... • Aim Remote directly at the remote sensor on the Combination VCR. (P. 47) • Avoid any object blocking signal path. • Inspect the remote batteries. (P. 4) • Make sure VCR LOCK is set to off. (P. 32) • Exposing Combination VCR remote sensor to direct fluorescent or outdoor light may cause signal interference. Miscellaneous Correction Video cassette cannot be inserted... • Insert the cassette window side up; record tab facing you. Video cassette cannot be removed... • Completely insert Power Plug into an AC outlet. Eject does not function or insertion cannot be done... • Turn the POWER off and then on, and try ejecting or inserting the tape again. Video cassette ejects when a recording is started, or the pow...


Tu reseña
Tu nombre:
Introduzca dos números de la imagen: