Iniciar sesión:
Votos - 3, Puntuación media: 4.7 ( )

Manual de usuario Ruger, modelo MINI-14

Fabricar: Ruger
Tamaño del archivo: 1.14 mb
Nombre del archivo: bfe8b06f-dc0c-4d7c-9c63-a6a41b130d90.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página

Resumen del manual

31 The rear sight is adjustable for both windage and elevation. A small punch, the head of a finishing nail, or other similar instrument can be used to depress the plunger to allow the adjustment to be moved one quarter turn in either direction. One quarter turn will move the point of impact 1 inch at 100 yards. The sight adjustments have been made deliberately positive by means of spring- loaded detent plungers so that settings cannot be accidentally disturbed under normal conditions. To Move Impact To Right To Move Impact To Left WINDAGE ADJUSTMENT: To move the bullet impact point to the right, move the rear sight base to the right by turning the adjustment knob counterclockwise. To move the bullet impact point to the left, move the rear sight base to the left by turning the side adjustment knob clockwise. To Move Impact Up To Move Impact Down ELEVATION ADJUSTMENT: To move the bullet impact point up, move the elevation slide (the “peep”) up by turning the top adjustment knob counterclockwise. To move the bullet impact point down, move the elevation slide down by turning the top adjustment knob clockwise. 32 SERVICE AND PARTS POLICY If you have any question with regard to the performance of your RUGER® MINI-14® rifle please write or call (603-865-2442) our Product Service Department in Newport, New Hampshire 03773, fully describing all circumstances and conditions involved. If you should return your rifle to the factory for repair, or order parts for it, please comply with the following suggestions for prompt service: WARNING: BEFORE SHIPPING ANY F I R E A R M , BE ABSOLUTELY C E R TAIN THAT IT AND ITS MAGAZINE ARE UNLOADED. DO NOT SHIP CARTRIDGES WITH A F I R E A R M . SHIPPING FIREARMS FOR REPAIR RUGER® MINI-14® rifles returned to the factory for repair should be sent to: Sturm, Ruger & Company, Inc., Product Service Department, 411 Sunapee St., Newport, New Hampshire 03773. Telephone (603) 865-2442. Guns should be sent prepaid. We will not accept collect shipments. The Federal Gun Control Act, as well as the laws of most States and localities, do not prohibit an individual (who is not otherwise barred from purchasing or possessing a firearm) from shipping a firearm directly to the manufacturer for repair. However, before you ship your rifle to us, be certain that your State or locality does not have a law or regulation which will prohibit you from receiving the rifle from us after it has been repaired. If such receiving is prohibited, then please have a Federally Licensed firearms dealer ship the gun to us. If your rifle is sent to us by a dealer, it will be returned to him after being repaired. If a handgun (pistol or revolver) is shipped by an individual who does not hold a Federal Firearms License, it must be shipped via U.P.S. (Next Day Air) Persons who do not hold a Federal Firearms License are prohibited by Federal law from shipping a handgun by Mail. Handguns mailed in violation of the law are impounded by the Post Office. DO NOT SEND GUN BOXES OR LITERATURE THAT YOU CONSIDER TO BE COLLECTOR’S ITEMS – THESE ARE INVARIABLY DAMAGED OR DESTROYED IN SHIPMENT. Please do not include rifle case, sling, telescopic sights or custom accessories with a firearm being shipped to the factory for service. Rifles and shotguns may be shipped via Parcel Post. Always insure your shipment. Enclose a letter which includes your name, address, telephone number, serial number and model of the firearm. Describe in detail the trouble you have experienced with your firearm, or the work you wish to have done. Merely stating that the firearm “needs repair” is inadequate information. Work performed will bear a net minimum labor charge of $20.00 plus a $12.00 shipping and handling charge. The charge for rebluing the RUGER® MINI-14® RIFLE is $50.00 plus a $12.00 shipping and handling charge. Custom gunsmithing service or nonstandard alterations are NOT AVAILABLE from Ruger Product Service Departments. 33 WA R N I NG –PARTS PURCHASERS It is the purc h a s e r’s responsibility to be absolutely certain that any parts ord e red fro m the factory are correctly fitted and installed. F i re a rms are complicated mechanisms and IMPROPER FITTING OF PA RTS MAY RESULT IN A DANGEROUS MALFUNCTION, DAMAGE TO THE FIREARM, AND SERIOUS INJURY TO THE SHOOTER AND OTHER PERSONS. T h e p u rchaser and installer of parts must accept full responsibility for the correct adjustment and functioning of the rifle after such installation. PARTS MUST FIT CORRECTLY ORDERING PARTS Please contact the New Hampshire Product Service Department for parts availability and current prices. All parts orders for the RUGER® MINI-14® rifle should be sent to: Sturm, Ruger & Co., Inc., Product Service Department, 411 Sunapee Street, Newport, New Hampshire 03773, 603-865-2442. We cannot comply with open account or C.O.D. orders. Payment in the form of a check, money order, Visa or Mastercard must accompany your order. Credit Card orders must include the account number, expi...


Tu reseña
Tu nombre:
Introduzca dos números de la imagen: